menu icon
Knowles CDE Logo

Type MLSH 125 °C Hermetic Slimpack

The World's only Hermetic Aluminum Electrolytic Capacitor

Type MLSH unique components feature a true glass-to-metal seal that prevents dry-out of the capacitor electrolyte. As a result, they provide extraordinarily long life (5,000 hours) to more than meet the most demanding applications for military and aerospace. With the line expansion just announced, they are now available in nine values, from 120 µF to 3,200 µF, with ratings up to 250 Vdc.

The hermetic Slimpack is an offshoot of the well-established non-hermetic Flatpack series. The new MLSH Slimpack can be used as a replacement for parallel and series banks of wet tantalum capacitors for both new and existing designs. This change is especially beneficial where bulk storage is paramount. MLSH Slimpack devices measure 1.0” x 1.5” x 0.5”, weigh less and have more capacitance than a parallel bank of three or more wet tantalum capacitors. High rated capacitance is maintained at temperatures as low as -55 °C, a key requirement for power supplies used in military and aerospace applications. Top-end temperature rating is 125 °C.

All devices in the MLSH Slimpack series feature rugged stainless steel cases with a vibration rating of 80g. In most applications, there are significant cost and space savings vs. a comparably rated bank of wet tantalum capacitors. The new high-voltage MLSH Slimpacks eliminate the need for series banking.


Highlights

  • Hermetically sealed aluminum electrolytic (no dry-out)
  • High capacitance retention at low temperature
  • 80 G Vibration
  • 125 °C maximum operating temperature (no derating required)
  • Lighter than equivalent wet tantalum
  • 1.5 V reverse voltage
  • DC life test to 5000 hrs @125 ºC, rated voltage
Mlsh Ad 2016 Tent Card

Applications Include:

Radar, military and commercial aircraft power supplies, mission critical systems.


Find a Rep Find a Distributor

New Products

  • 3 CELL DSF & DGH
    Released Mar, 2024

    3 CELL DSF & DGH


    Three-cell devices offer greater energy potential and power output than single or dual-cell parts in standard PCB layouts

    3-cell DSF & DGH capacitors provide very fast power discharge that cannot be matched by conventional capacitors or batteries. That large capacity makes it possible to support brief power interruptions, supplement batteries, or even be used in place of batteries in many applications.

    Read More »

  • TYPE MXT, X2, EMI/RFI Suppression Capacitors, Harsh Environment
    Released Nov, 2023

    TYPE MXT, X2, EMI/RFI Suppression Capacitors, Harsh Environment

    Type MXT Series Metallized Polypropylene Film Capacitor, designed to suppress conducted electromagnetic/radio frequency interference (EMI/RFI) at a circuit’s power input. These capacitors are perfect for use in harsh environments having met the demanding 85/85 THB (Temperature, Humidity, Bias) test requirements. Class X2 capacitors, like the MXT, are typically connected across the AC input to prevent interference from spreading through power lines or other devices on the same circuit.

    Read More »

  • Y2 Class Interference Suppression Capacitors  Meet 2,000-Hour 85/85 THB Tests, AEC-Q200
    Released Sep, 2023

    Y2 Class Interference Suppression Capacitors Meet 2,000-Hour 85/85 THB Tests, AEC-Q200

    Type MYH series of Y2, EMI/RFI suppression capacitors are designed for harsh environments. The MYH series is AEC-Q200 qualified, meets a 2,000-hour THB (Temperature, Humidity, Bias) life test, and has applications in motors, AMR (Automated Meter Readers), UPS, power supplies, charging systems, and appliances. These Y2, line-to-ground capacitors filter out electromagnetic noise and have multiple international safety agency approvals.

    Read More »