New Products
-
Released Aug, 2024
Type QAS, Arc Suppressor/Snubber Network
Type QAS will extend the operating life of electronic and electro-mechanical devices by reducing and/or eliminating the electrical arcing, noise, and EMF. These electrical conditions often cause early failures in relays, switch contacts, and solid-state components such as SCRs and TRIACs.
-
Released Mar, 2024
3 CELL DSF & DGH
Three-cell devices offer greater energy potential and power output than single or dual-cell parts in standard PCB layouts
3-cell DSF & DGH capacitors provide very fast power discharge that cannot be matched by conventional capacitors or batteries. That large capacity makes it possible to support brief power interruptions, supplement batteries, or even be used in place of batteries in many applications.
-
Released Nov, 2023
TYPE MXT, X2, EMI/RFI Suppression Capacitors, Harsh Environment
Type MXT Series Metallized Polypropylene Film Capacitor, designed to suppress conducted electromagnetic/radio frequency interference (EMI/RFI) at a circuit’s power input. These capacitors are perfect for use in harsh environments having met the demanding 85/85 THB (Temperature, Humidity, Bias) test requirements. Class X2 capacitors, like the MXT, are typically connected across the AC input to prevent interference from spreading through power lines or other devices on the same circuit.
-
Released Sep, 2023
Y2 Class Interference Suppression Capacitors Meet 2,000-Hour 85/85 THB Tests, AEC-Q200
Type MYH series of Y2, EMI/RFI suppression capacitors are designed for harsh environments. The MYH series is AEC-Q200 qualified, meets a 2,000-hour THB (Temperature, Humidity, Bias) life test, and has applications in motors, AMR (Automated Meter Readers), UPS, power supplies, charging systems, and appliances. These Y2, line-to-ground capacitors filter out electromagnetic noise and have multiple international safety agency approvals.
-
Released Jul, 2023
TYPE MXH, X2, EMI, RFI Suppression Capacitors, Harsh Environment
The MXH series is AEC-Q200 qualified, meets a 2,000-hour THB (Temperature, Humidity, Bias) life test, and has applications in motors, AMR (Automated Meter Readers), UPS, power supplies, charging systems, and appliances. These X2, across-the-line capacitors filter out electromagnetic noise and have multiple international safety agency approvals.
-
Released Apr, 2023
Standard Supercapacitor Modules
The DSM Series responds to the need for supercapacitor storage capabilities at higher voltages than what single components can provide. The new modules are offered in packs with 3, 6, or 10 cells in series, for 9V, 18V, and 30V outputs. Capacitance values from 0.15 to 36.6 farads. These options provide designers with tested, ready-to-use solutions.
-
Released Mar, 2023
Type 944L Low Inductance DC Link for Fast Switching Applications
Applications in green energy inverter systems and level 3 EV chargers are placing greater demands on power conversion circuits that deliver more power with a smaller footprint. The 944L Series was designed to support the needs of higher-frequency switching inverters and converters.
-
Released Jan, 2023
MLPS Flatpack series allows designers to create higher-performance end products optimized for 105°C
Type MLPS Flatpack, is a low-profile aluminum electrolytic capacitor, tested and rated for 10,000 hours at 105 °C. Type MLPS offers high capacitance density in a flat configuration, with voltage ratings up to 450 Vdc and a temperature range from -55 °C to 105 °C. Their rugged construction provides extraordinary life and reliability for the most robust, commercial, and military-grade power supplies.
-
Released Dec, 2022
Expanded Line of Polymer Chip Capacitors Now Offers Voltage Ratings up to 35 VDC
Cornell Dubilier’s XMPL Series Polymer Chip Capacitor series has been expanded to match applications requiring higher voltage and/or capacitance requirements.